Monitor Audio Vector Service Manual download pdf (Page 125)

Remove and Replace

WFM90D and WFM91D Service Manual

6-25

Battery Cover Assembly

The battery cover assembly contains replaceable subparts. Procedures for

removing the subparts are included.

Remove. To remove the battery cover assembly:

1. Turn the turnlock stud 1/4-turn counterclockwise.

2. Pull outwards on the upper portion of the battery cover.

Replace. To replace the battery cover assembly:

1. Place the lower lip of the battery cover into the instrument housing and press

the top portion of the cover into the instrument. See Figure 6--11 on

page 6--26.

2. Secure the battery cover by turning the turnlock stud 1/4-turn clockwise.

Remove. To remove the carrying strap:

1. Remove the battery cover. Refer to Battery Cover on page 6--25.

2. To remove the carrying strap, remove the two retaining nuts on the inside of

the battery cover and pull the carrying strap off of the cover.

Replace. To replace the carrying strap:

1. Insert the two standoff studs of the carrying strap through the battery cover

and install the two retaining nuts.

2. Install the battery cover. Refer to Battery Cover on page 6--25.

Battery Cover

Carrying Strap

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 179 180

No comments

Monitor Audio Vector Service Manual Page 125