Monitor Audio Vector User Manual download pdf (Page 52)

Reference: Using the Menus

3–2

WFM 90 & WFM 91 User Manual

H When menu selections are made, changes to the display occur

immediately.

H When the Configuration menu is open, the

Y and B buttons are

reassigned from their default function to selecting the menu

category. The

A and " buttons retain their default function for the

currently selected display mode.

Operating Menus

The following pages describe the Operating menus for the different

display modes. The Operating menu selections only affect the

display mode in which they appear unless otherwise noted.

Waveform Display Mode Operating Menu

GAIN. Toggles the Waveform display mode vertical gain and the

Vector display mode gain between

X1 and X5.

FILTER. Toggles the Waveform display between

FLAT (no filter),

and

LUM (low-pass filtered for luminance display).

SWEEP. Cycles the sweep rate through

1H (5 ms/division), 2H

(10 ms/division), and 2F (two field).

MAG. Toggles the Waveform horizontal gain between

ON and OFF.

When

MAG is ON, additional sweep rates are available: 1H + MAG

(0.5 ms/division), 2H + MAG (1 ms/division), and 2F + MAG

(magnified by approximately X20).

Vector Display Mode Operating Menu

GAIN. Toggles the Vector display mode gain and the Waveform

display mode vertical gain between

X1 and X5.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 85 86

No comments

Monitor Audio Vector User Manual Page 52