Monitor Audio AirStream 10 User Manual download pdf (Page 24)

AirStream 10

Changing the Audio Setting

It is possible to program the audio setting of the AirStream 10 to always play stations

in mono, or to switch automatically from stereo to mono when the signal quality is low.

Even when receiving a stereo signal the AirStream 10 will only output a mono sound

from the loudspeaker.

Press the ‘Menu’ key and use the ‘Tune/Select Dial’ to scroll to ‘Audio setting’ 1.

and press to select.

Use the ‘Tune/Select Dial’ to scroll to ‘Stereo or Mono’ or ‘Mono only’ and press 2.

to select.

Storing a FM Station Preset

The AirStream 10 can store up to 4 FM stations in preset memory locations for instant

access to favourites stations.

When the AirStream 10 is playing the station to be saved to a preset, press and hold

the 1-4 preset button it is to be stored to. The display will conﬁrm ‘Preset Stored’.

Note:

When storing FM radio station presets, these do not overwrite previously stored

Internet or DAB station presets. However, if there is already an existing FM station

stored under the preset, it will be overwritten with the new station.

Select a FM Station Preset

In FM mode, press the preset number and the AirStream 10 will connect to that

station and begin to play.

Note:

If a preset has no previously stored station assigned, the display will change to ‘Preset

empty’ and then revert to the selected station after a few seconds.

FM Display Information

When listening to a FM station (and the RDS symbol is displayed, see opposite), it is

possible to change the information that will appear on the second line of the display.

Choose between the frequency, type of show, such as ‘Rock, ‘Pop, Talk ‘or ‘News’,

the time or the date. Press the ‘Info.’ key repeatedly to move through the display

options.

FM Mode Display

Below is an example of the display and the icon status when a station is ‘tuned in’ or

selected by using one of the 4 preset buttons.

This Symbol will always be displayed whenever the AirStream 10 is

powered, symbolising that the product is connected to the mains

voltage supply.

This Symbol indicates the signal strength. Obviously, the more bars

displayed, the stronger the signal. There will be a maximum of 5 bars

displayed.

These back to back speakers indicate a stereo signal. If the signal

strength is strong enough, this symbol will be shown and indicates

that it is receiving a stereo signal rather than a mono signal.

Indicates a RDS signal is being received. The Radio Data Service being

transmitted by the broadcaster will have various pieces of information

contained within it and they can be displayed on the Airstream 10 by

pressing the “Info” button and scrolling through the different pieces of

information. Content will vary depending on broadcaster.

This indicates if the current station is stored to a speciﬁc preset -

( P1- P4). No display indicates the station has no preset.

This is the current set time and will be constantly displayed on your

AirStream 10.

R.D.S

Radio 1

Today’s Date:

DD/MM/YYYY

12:00R.D.S

12:00

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comments to this Manuals

No comments

Monitor Audio AirStream 10 User Manual Page 24

Comments to this Manuals