Monitor Audio AirStream 10 User Manual download pdf (Page 20)

AirStream 10

If using the AirStream 10 outside of the UK, use the ‘Tune/3. Select Dial’, and scroll

to and select ‘Full scan’. This will start a much wider, national and local scan. A

full scan will take between 1 minute to 3 minutes to complete.

Note:

Occasionally, a ’?‘ will be displayed alongside a station name. This indicates that the

station is not available/not currently active. This could occur if attempting to tune into

a secondary service/station at a time when it is not transmitting.

Storing a DAB Station Preset

The AirStream 10 can store up to 4 DAB stations in preset memory locations for

instant access to favourites stations.

When the AirStream 10 is playing the station to be saved to a preset, press and hold

the 1-4 preset button it is to be stored to. The display will conﬁrm ‘Preset Stored’.

Note:

When storing DAB radio station presets, these do not overwrite previously stored

Internet or FM station presets. However, if there is already an existing DAB station

stored under the preset, it will be overwritten with the new station.

Select a DAB Station Preset

In DAB mode, press the preset number and the AirStream 10 will connect to that

station and begin to play.

Note:

If the preset location is empty, the display will conﬁrm this with: ’Preset empty’ before

reverting to the previously selected station after a few seconds.

DAB Display Information

When listening to a DAB station you can change the information that appears on the

second line of the display below the station name. There are several different types

of information that are transmitted by the broadcaster. Press the ‘Info’ key to scroll

through the display options.

Dynamic Label Segment Program Type Multiplex Name

Todays Date Signal Info Signal Error/ Strength

Dynamic Label Segment (DLS) - This is scrolling text information supplied by the

broadcaster. Information could contain the name of an artist or music title, DJ’s name,

contact details for the radio station, etc.

Program Type (PTY) - Such as ‘Rock, ‘Pop, Talk’ or ‘News’

Location & Frequency - Displays the broadcasting area and sampling frequency.

Signal Error- The information provided gives details of the signal error rate, shown

as a number between 0 - 99. It will not be possible to satisfactorily listen to a radio

station with a signal error rate of 30 or above. Try adjusting the aerial or repositioning

the AirStream 10 to improve reception.

Signal Information -The data rate at which the signal is being transmitted, codec

and channels.

Todays Date - Date information supplied by the broadcaster.

Preset Stored

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Monitor Audio AirStream 10 User Manual Page 20