Monitor Audio AirStream A100 User Manual download pdf (Page 19)

If the A100 is placed into Ready Mode while an iOS-

device is connected via USB, it will continue to charge.

HINT

Checking Firmware Version

It is possible to see what version of rmware and software the

A100 is running. This may be needed when contacting Monitor

Audio.

1. With the A100 powered up and out of standby mode, connect

your iOS-device to the USB port of the A100 using the Apple

supplied lead.

2. On the device, go to Settings, then General and then About.

3. In the About section scroll down the screen to you see

Airstream A100.

4. Select Airstream A100 and you will see a screen showing the

Manufacturer, Model, rmware version and hardware version.

Ready Mode

What is Ready Mode?

Ready Mode is another form of standby. However, when in Ready

Mode, the A100 will also automatically awake if you try to play

something via USB, AirPlay or Airstream Direct.

How to Enter Ready Mode

1. With the A100 turned on and out of standby mode (LED not

ashing), press and hold the standby button for about 3

seconds.

2. The LED will start to ash orange indicating it is entering

Ready Mode. When it stops ashing and is illuminated yellow,

the A100 is now in Ready Mode.

It is now possible to automatically wake the A100 by either

connecting a device via the USB or streaming to it via AirPlay.

The A100 cannot be put into Ready Mode using the remote.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Monitor Audio AirStream A100 User Manual Page 19