Monitor Audio AirStream A100 User Manual download pdf (Page 16)

Charging via the USB

Before proceeding, please ensure the A100 is turned on from

standby mode.

1. Connect the apple supplied USB lead to the A100 and your device.

Firmware Update.

The A100 automatically searches for software updates whenever

it is turned on (providing there is a connection to the internet).

However, there are other ways of updating the rmware. These

are manually via the internet or via a USB memory stick. Details

of all methods are outlined below.

AutomaticNoticationofFirmwareUpdate

By default the A100 is set up to inform you a rmware update is

available automatically.

1. After the A100 has gone through the initial boot up procedure

and connected to the network (blue LED stops ashing), the

LED will ash white slowly (Pattern 1) indicating that an

update is available.

2. Press and hold the standby button until the LED on the front

is illuminated solid white.

3. Release the button and the LED will then go through various

states and colour changes, indicating dierent stages of the

update process:

White (Flashing very fast) - Updating the rmware.

Cyan (Illuminated for 2 seconds)

OFF - Update complete.

4. Once the update has been successfully completed, the A100

will go through the initial start up procedure as described on

page 4.

5. You may then need to reconnect the A100 to the WiFi network as

described on page 6.

If the LED is slowly ashing red, the update has failed.

Follow the steps for the Manual Update by internet or

USB to ensure its success.

HINT

You can continue to use other sources while you are

charging your device. If you wish to play music from

the device currently charging, we would recommend

using the USB, digital input rather than AirPlay.

HINT

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Monitor Audio AirStream A100 User Manual Page 16