Monitor Audio AirStream A100 User Manual download pdf (Page 11)

Via Laptop/ PC

1. Turn the A100 on from standby mode. The LED on the front

will ash blue, rstly in pattern 2 then pattern 1.

2. When it changes to Pattern 1, it is not connected to a wireless

network. Press and hold the AirstreamConnect/ Airstream

Direct Button (Item 2 on Page 3) for approximately 12 seconds

until the LED on the front ashes white (Pattern 3).

3. On the Laptop/ PC, go to the Wireless network selection tool.

4. In the list will be your network (probably with “Connected”

next to it), and any other wireless networks within range. One

of them will be Airstream A100.

5. Click on Airstream A100, and then the Connect button. After

a few seconds, you will be connected to the Airstream A100

wireless network.

Continue to Step 7.

6. On a Mac, click on the wireless network signal strength

indicator located in the bar at the top of the desktop and

select Airstream Connect. Continue to Step 7 below.

On a Windows 7 Machine, click on the WiFi strength

indicator in the bottom right hand corner. If it is

hidden, click on the little up arrow.

HINT

The Laptop or PC, must be wireless enabled with

wireless turned on.

HINT

If Airstream A100 isn’t displayed, click the refresh

arrows (top right corner of the window).

HINT

With both Windows and Mac OS’s, if Airstream A100

isn’t displayed, come out of the selection window and

then try again after a few seconds.

HINT

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Monitor Audio AirStream A100 User Manual Page 11