Vidscope-HD User Manual
Manual vidscope-hd v2.doc
5.6 Soundcard settings
To be able hear the audio monitored through the computer's speakers or
audio line out socket, the wave audio must be selected through output
section of the mixer. This is independent of the recording mixer part of
the same soundcard. Thus, the soundcard output mixer needs to be
accessed. This is sometimes labelled - or +-
depending on the make or type of soundcard This can be done either
from the loudspeaker button on the vidscope audio menu or the mixer or
speaker icon on the Windows taskbar at the bottom of the screen.
If you have two or more soundcards, you need to check the
tab in the Windows mixer menu to make sure that you are controlling the
correct soundcard. To select the Line-In socket or whichever socket you
have used to connect the radio, either click the select check box or
make sure it's mute is off (if the input has one).
The fader for the input selected needs to be halfway or all the way out.
Then adjust the master volume of best listening.
Comments to this Manuals