search

Monitor Audio EN 50020 User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 2
Encoder Commands
Command Required Variables Example Command Description
N-Series
Support
V-Series
Support
live Encoder IP live 169.254.104.1 <┘ Encoder or decoder to live play mode. Y Y
modeoff Encoder IP modeoff 169.254.105.25<┘
Disables the encoder from broadcasting any traffic to the network. If
any encoders are viewing this stream, they will transition to local play
(loss of stream)
Y Y
local Encoder IP and Playlist # local 169.254.30.238 1<┘ Activate a Host playlist. Valid Options are 1-8. Y Y
serial
Encoder IP and Serial Command
ID
serial 169.254.17.88 29<┘
Sends stored serial command (referenced by CommandID #) to
device at IP address. Command not valid for V-Series Encoders
Y N
serialhex
Encoder, Wait Time, Serial
Command HEX
serialhex 1 169.254.17.88 43 4f 4d 4d 41 4e 44<┘
Send raw serial command (HEX) to device through Conductor. Wait
time determines time for conductor to automatically ask for the
response from the attached device.
Y N
serialhex
Encode, Wait Time, Serial
Command ASCII
serialhex 1 169.254.17.88 "COMMAND"<┘
Send raw serial command (ASCII) to device through Conductor. Wait
time determines time for conductor to automatically ask for the
response from the attached device.
Y N
readresponse encoder IP readresponse 169.254.17.88<┘
reads the response from a serial command sent from Conductor
where "Read Response" checkbox was enabled when command is
saved, or serialhex command is utilized.
Y N
sendir encoder IP, command name sendir 169.254.212.1 Play<┘
N-Series Devices Only: Execute IR Command saved on
Encoder/Decoder. Reference is by name, and CaSE sensitive.
Y N
sendirraw Encoder IP, IR Pronto Code
sendirraw 169.254.38.121 0000 006C 0022 0000 015B 00AD 016 0016
0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016
0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041
0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016
0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041
0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041
0016 0041 0016 0622<┘
N-Series Devices Only: Execute IR Command without saving
command on device. Uses long form Pronto Hex Codes, provided by
equipment manufacturer.
Y N
audioon Encoder IP audioon 169.254.30.238<┘ Enables audio output for encoder or decoder Y Y
audiooff Encoder IP audiooff 169.254.30.238<┘ Disables audio output for encoder or decoder Y Y
enablecc Encoder IP enablecc 169.254.105.1<┘ Enables Color Space Correction (use if screen is pink or green) Y Y
disablecc Encoder IP disablecc 169.254.105.1<┘ Disables Color Space Correction (use if screen is pink or green) Y Y
autocc Encoder IP autocc 169.254.105.1<┘ Sets Color Space Correction to Auto (N-Series Encoders ONLY) Y N
enablehdmiaudio Encoder IP enablehdmiaudio 169.254.105.1<┘
Enables HDMI audio on Encoder (if video source is analog, this is
disabled by default)
Y Y
disablehdmiaudio Encoder IP disablehdmiaudio 169.254.105.1<┘ Disables HDMI audio, and will only utilize Analog Audio connection Y Y
autohdmiaudio Encoder IP autohdmiaudio 169.254.105.1<┘
N-Series Only - Encoder detects HDMI audio support via Source EDID
information and enables/disables as appropriate
Y N
Decoder Commands
Command Required Variables Example Command Description
N-Series
Support
V-Series
Support
switch Decoder IP and Encoder IP switch 169.254.104.1 169.254.105.1 <┘
Switch decoder video stream by IP address, if decoder audio follows
is enabled, this will switch the audio stream as well.
Y Y
switch
Decoder IP and Encoder Stream
Number
switch 169.254.104.1 212 <┘
Switch decoder video stream by encoder stream number, if decoder
audio follows is enabled, this will switch the audio stream as well.
Y Y
switchaudio Decoder IP and Encoder IP switchaudio 169.254.104.1 169.254.105.1 <┘
Switch decoder audio stream by IP address. This will only switch the
audio stream. Note - Decoder will have a * next to it's name in the
matrix when the device is not set to audio follow video
Y Y
switchaudio
Decoder IP and Encoder Stream
Number
switchaudio 169.254.104.1 212 <┘
Switch decoder audio stream by encoder stream number. This will
only switch the audio stream. Note - Decoder will have a * next to it's
name in the matrix when the device is not set to audio follow video
Y Y
audiofollow Decoder IP audiofollow 169.254.104.1 <┘
Set the decoder back to audio follow mode. IF currently listening to a
different audio stream, box will immediately switch to current video
streams audio. Can also be accomplished by sending a switchaudio
command to set to stream 0.
Y Y
live decoder IP live 169.254.104.1 <┘ decoder to live play mode. Y Y
local Decoder IP AND Playlist # local 169.254.30.238 1<┘
Activate a Local playlist. Valid Options are 1-8. Check device
limitations, some devices only support playlist 1.
Y Y
serial
Decoder IP and Serial Command
ID
serial 169.254.17.88 29<┘
Sends stored serial command (referenced by CommandID #) to
device at IP address.
Y Y
serialhex
Decoder IP, Wait Time, Serial
Command HEX
serialhex 1 169.254.17.88 43 4f 4d 4d 41 4e 44<┘
Send raw serial command (HEX) to device through Conductor. Wait
time determines time for conductor to automatically ask for the
response from the attached device.
Y Y
serialhex
Decoder IP, Wait Time, Serial
Command ASCII
serialhex 1 169.254.17.88 "COMMAND"<┘
Send raw serial command (ASCII) to device through Conductor. Wait
time determines time for conductor to automatically ask for the
response from the attached device.
Y Y
readresponse decoder IP readresponse 169.254.17.88<┘
reads the response from a serial command sent from Conductor
where "Read Response" checkbox was enabled when command is
saved, or serialhex command is utilized.
Y Y
sendir Decoder IP, Command Name sendir 169.254.212.1 Play<┘
Execute IR Command saved on Decoder. Reference is by name, and
CaSE sensitive.
Y N
sendirraw Decoder IP, IR Pronto Code
sendirraw 169.254.38.121 0000 006C 0022 0000 015B 00AD 016 0016
0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016
0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041
0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016
0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041
0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041
0016 0041 0016 0622<┘
Execute IR Command without saving command on device. Uses long
form Pronto Hex Codes, provided by equipment manufacturer.
Y N
audioon decoder IP audioon 169.254.104.1<┘ Enables audio output for decoder Y Y
audiooff decoder IP audiooff 169.254.104.1<┘ Disables audio output fordecoder Y Y
dvion decoder IP dvion 169.254.104.1<┘ Enables the DVI output of Decoder Y Y
dvioff decoder IP dvioff 169.254.104.1<┘ Disables the DVI output of the Decoder Y Y
enablehdmiaudio decoder IP enablehdmiaudio 169.254.104.1<┘ Enables digital Audio Output of Decoder Y Y
disablehdmiaudio decoder IP disablehdmiaudio 169.254.104.1<┘ Disables digital Audio Output of Decoder Y Y
Page view 2
1 2 3 4 5 6

Comments to this Manuals

No comments
Related products and manuals for Soundbar speakers Monitor Audio EN 50020
Soundbar speakers Monitor Audio Vector Operations Instructions   (46 pages)
Soundbar speakers Monitor Audio EN 50082-1 User Manual   (2 pages)
Soundbar speakers Monitor Audio Bronze BR2 Instruction Manual   (17 pages)
Soundbar speakers Monitor Audio Vector Service Manual   (180 pages)
Soundbar speakers Monitor Audio Vector User Manual   (86 pages)
Soundbar speakers Monitor Audio 200 Series Installation Guide   (4 pages)
Soundbar speakers Monitor Audio GR20 Operations Instructions   (18 pages)
Soundbar speakers Monitor Audio Silver 6 User Manual   (16 pages)
Soundbar speakers Monitor Audio CWT 160 User Manual   (1 pages)
Soundbar speakers Monitor Audio Airstream s300 User Manual   (24 pages)
Soundbar speakers Monitor Audio Controlled Performance series Installation Guide   (13 pages)
Soundbar speakers Monitor Audio Radius HD User Manual   (4 pages)
Soundbar speakers Monitor Audio CWT 160 User Manual   (13 pages)
Soundbar speakers Monitor Audio Silver 6 Instruction Manual   (17 pages)
Soundbar speakers Monitor Audio EN 50020 Specifications    (14 pages)
Soundbar speakers Monitor Audio IWS-10 User Manual        (20 pages)
Soundbar speakers Monitor Audio EN 50082-1 Installation Guide   (4 pages)
  • BBE Sound Teleks Safesight WINTAIR Alfi
  • Epson Equipment cleansing kit Soligor Unknown McIntosh DVD players Fostex Software LG Access cards
  • Huawei HUAWEI Mate 10 lite Casio fx-CP400 Toshiba X205 Acer SF114-32
  • LG 43LF590V User Manual Samsung SC6366 User Manual Asus RT-N12 (VER.D1) User Manual AEG L76480FL User Manual