Monitor Audio Airstream S200 User Manual download pdf (Page 13)

In both instances, the LED on the front of the S200 will be blue

when in AirPlay mode. If it doesn’t automatically change to

AirPlay mode when songs start playing, press the input toggle

button (item 6 on page 3) on the S200 to cycle inputs.

Playing via Bluetooth

Before proceeding, please ensure the S200 is turned on from

standby mode.

1. On the S200 press the Input toggle button (item 6 on page

3) until the Bluetooth input is selected (Cyan) this will be

ashing Pattern 2 while it searches for a paired device.

2. Go to the Bluetooth settings of your playback device and

enable Bluetooth, select and connect to ‘Monitor Audio

S200..’. Once connected, the LED on the front of the S200 will

change to solid Cyan.

Please refer to your device’s instructions for how to play to

the S200.

Playing and Charging via the USB

Before proceeding, please ensure the S200 is turned on from

standby mode. Please see the list of compatible devices on Page 2.

1. Connect the apple supplied USB lead to the S200 and your device.

It will automatically start charging.

2. Press the Input toggle button on the S200 (item 6 on Page 3)

until the USB source is selected (white LED).

3. Press play on your device.

If the LED on the S200 is ashing, it is either

initialising (Pattern 2#) or it is hunting for a wireless

network (Pattern #1). In either state, the AirPlay logo

may not be visible on the iOS-device.

HINT

If the LED on the S200 is solid, it is already attached

to a paired device within rage. Disconnect this device

and the LED will start to ash again. Only one device

can be connected at any one time.

HINT

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

No comments

Monitor Audio Airstream S200 User Manual Page 13