Monitor Audio RXFX Specifications download pdf (Page 12)

FIXING THE RX-FX TO A WALL

CAUTION: You will need to determine where the RX-FX will be ﬁxed and the structure

of the wall. For safety reasons, if you are unsure of your ability to provide a secure and

safe ﬁxing, do not attempt to ﬁx these speakers to your wall, please obtain the services

of a competent and qualiﬁed trades person.

CAUTION: Ensure that there are no water pipes or electricity cables running behind

where the wall brackets are going to be secured. Work from secure steps and avoid

trailing wires.

We do not supply wall ﬁxing screws and plugs with the RX-FX. Please use suitable ﬁxings

for the type of wall construction the RX-FX’s will be ﬁxed to.

To ﬁx your RX-FX’s to the wall, we would recommend using the wall ﬁxing template enclosed

within the packaging carton

PLINTH FIXING

(RX6 & RX8 only)

The Silver RX6 & RX8’s are provided with plinths to improve stability and acoustic response.

The plinths are secured in place by using the supplied M8 bolts.

Before you ﬁt the plinth ensure the ﬂoor area is clear of any hard/sharp objects. To ﬁt the

plinth turn the cabinet over so that the bottom is facing upwards. Then, place the plinth

onto the cabinet ensuring the plinth is orientated correctly, lining up the bolt holes in the

plinth with the inserts in the cabinet. Using the bolts, secure the plinth to the cabinet.

Tighten them up gradually at ﬁrst and ensure the plinth is ﬁtted securely to the cabinet. Fit

the feet to the plinth before turning the loudspeaker back over. (Please read the instructions

opposite). The spikes are used to improve sound quality and bass performance

GRILLES

All of the Silver RX speakers come with grilles covered in acoustically transparent cloth.

The grilles are held invisibly in place by magnets in both the grille and the cabinet (except

RX-FX).

To ﬁt them, ﬁrstly ensure they are the correct way up (badge at the bottom) and offer them

up to the cabinet. The magnets should them pull it into position.

The RX-FX comes with the grilles factory ﬁtted. If you wish to remove them, carefully prize

them away from the cabinet with the tips of your ﬁngers. There are three separate grilles

ﬁtted to each RX-FX cabinet.

CAUTION: Do not lift or move the loudspeaker with the grilles ﬁtted. If any movement

needs to be done, please remove the grilles ﬁrst.

silver RX10

Silver RX Manual.indd 10 03/06/2009 16:18:14

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Monitor Audio RXFX Specifications Page 12